![]() Now, on the DockStar, in the boot loader (CE>), do this: Then unmount the usb key and plug it into your DockStar: Sudo tar xvzf ~/doc/Seagate/DockStar/debian/sheeva-2.6.34. ![]() Sudo wget md5sum -c sheeva-2.6.34.1-uImage.md5 Sudo tar xvjf ~/doc/Seagate/DockStar/debian/2 ![]() : first I created a usb stick for booting, by connecting the stick to my linux workstation:Īnd created a large linux partition on it. Usb_bootcmd=run usb_init run usb_set_bootargs run usb_bootīootcmd=usb start run force_rescue_bootcmd run ubifs_bootcmd run usb_bootcmd usb stop run rescue_bootcmd run pogo_bootcmd reset Usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params Usb_scan=usb_scan_done=0 for scan in $usb_scan_list do run usb_scan_$scan if test $usb_scan_done -eq 0 & ext2load usb $usb 0x800000 /boot/uImage 1 then usb_scan_done=1 echo "Found bootable drive on usb $usb" setenv usb_device $usb setenv usb_root /dev/$dev fi done Ubifs_bootcmd=run ubifs_set_bootargs if ubi part data & ubifsmount rootfs & ubifsload 0x800000 /boot/uImage & ubifsload 0x1100000 /boot/uInitrd then bootm 0x800000 0x1100000 fi Ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params Pogo_bootcmd=if fsload uboot-original-mtd0.kwb then go 0x800200 fiįorce_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1 then run rescue_bootcmd fi Rescue_bootcmd=if test $rescue_installed -eq 1 then run rescue_set_bootargs nand read.e 0x800000 0x100000 0x400000 bootm 0x800000 else run pogo_bootcmd fi Rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params Mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) Wow, that was quick - after the intial "ok" everything just flew along. : Yes, it worked, we now have a new uBoot: : for reference, the uBoot commands that I am going to change: Links: Install Debian Lenny on a DockStar, update uBoot on a DockStar,
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |